How to www.tplinkwifi.net setup and router installation

Tplinkwifi.net setup and router installation

TP-Link has achieved many milestones in their span of two decades only. TP-Link has a dedicated web address for the convenience of their users which is www.tplinkwifi.net This customized web address from TP-Link has proven to be of great help to its customers as they earlier had to face a lot of hassles while getting into the router setup page. The users have had to go through a complex login procedure when they were used to login through the default IP address 192.168.0.1. Therefore, TP-Link has cared for the ease of access for the users.

Advantages of the web address tplinkwifi.net

There are many advantages of this web link tplinkwifi.net from TP-Link. Some of them are listed below.

Easy and quick setup of the TP-link routers as compared to the default IP which is very hard to remember.

This user-friendly web address tplinkwifi.net can also be used for configuring the other networking devices like TP-Link modems etc.

www.tplinkwifi.net, as we know, is a custom domain, so it is much easier to quote in the URL bar of the browser and the number of errors while accessing the router through this address is much lower than that of the default IP address as the users tend to forget the IP address easily.

Important points to remember

v  The configuration cannot be done if the hardware isn’t connected to each other properly.

v  The initial connection between the router and the computer system is much necessary so as to get the networking done properly. Some of the methods through which the router can be connected to the computer system are listed below.

•       WPS connection (wireless)
•      Ethernet cable connection (wired)
•      Connection over the system Wi-Fi (wireless)

TP-Link router setup via tplinkwifi.net

TP-Link routers

TP-Link has been ranked number one several times by the concerned regulatory bodies. This brand has never disappointed any of its users as they have always tried to deliver some of the best networking products and their services. TP-Link always believes in providing a reliable and hassle-free service to the users.

TP-Link router setup via tplinkwifi.net

Before we move on to the router configuration of the TP-Link wireless router, let us show how you can easily establish the initial hardware connection in between the devices. The TP-Link wireless routers and other networking equipment like modems etc. can be accessed and set up through www.tplinkwifi.net and then authorize your access with a default username and password which is “admin” and “admin” respectively.

Various connection methods for the networking hardware

The most important aspect of establishing the networking hardware connections is that how these connections are done. There are several possible ways through which you can establish a secure and stable connection between the router, modem and computer device.

·         Ethernet cable connection (RJ45 wired)

·         Wi-Fi connection (wireless)

·         WPS connection

Ethernet cable connection

The Ethernet cable connection is also known as LAN cable connection in which the cords of RJ45 (Ethernet cords) are used. The user has to first connect the modem to the internet (WAN) port of the router. Similarly, connect the computer system to the LAN port of the router.

Wi-Fi connection

The Wi-Fi connection is the most widely used method of establishing a secure connection between the components. The wireless connection is although much used it is advised not to use this method for initial setup.

WPS connection

WPS mode of connection is the most convenient and quickest method of connecting the networking hardware with each other. You just need to push the WPS button given on the router device and wait for few seconds till it gets connected to the available wireless network itself.

TP-link router setup after login via tplinkwifi.net

TP-link router setup after login via tplinkwifi.net

TP-link brand is known for providing some of the best devices like routers, modems, range repeaters, and Ethernet cables etc. The users are required to access the device login window of these devices so that the configuration portal of the device can be accessed in turn. The setup access window can be accessed through tplinkwifi.net.

Updating the firmware of the router through tplinkwifi.net

Updating the firmware of the router is an essential process as, without the regular firmware updates, the device’s performance can get a bit inefficient.

Follow the instructions mentioned below to get your router firmware up to date within minutes of time.

1. Primarily you will need to download the firmware update file from the support portal in the download center of TP-Link i.e. www.tplink.com/support.
2. Now that you have the firmware update file downloaded, open the web browser and enter the web address www.tplinkwifi.net in the address bar and proceed on with the passkey authorization.
3. Select the required connection type from the internet and settings tab.
4. Any other step left should be followed on the screen so that the configuration is done completely and the reboot is to be done.

Important- it is advised that the user should set the primary hardware connection between the devices with the help of Ethernet cables as the wired Ethernet connection is more safe and reliable to use.

How to setup TP-Link Wi-Fi Router

TP-link Wi-Fi net setup

The TP-Link Wi-Fi setup usually takes very less amount of time since everything happens very quickly among all the people who try to get going with this thing. Once the people have started accessing this, the person can easily get started with performing various things by doing as much as they can. People can easily get used to the whole thing of going to the official website but sometimes it becomes hard for even the native user to understand the whole scenario of the thing. As the time goes by, the people would not find any kind of problems in the whole thing and would be happy to help in the case of a disruption in the system. The TP-Link Wi-Fi Setup is extremely easy to get started with and should not be a hard thing to learn.

How to setup TP-Link Wi-Fi Router (http://tplinkwifi.net)

1. To get started, you need to go to your laptop and visit the Wi-Fi settings page.
2. Then, after turning on the TP-Link Router, you will be required to connect to this router’s Wi-Fi network. The password for the connection will be given at the underside of the device in the form of a code printed on a sticker.
3. When this has been done as well, you would be required to open up a web browser and wait for the whole app to load up.
4. Go to the website http://tplinkwifi.net.
5. By going here, you will come across a setup wizard.
6. Follow this step by step procedure in order to ensure a proper setup and end up with a good conditioned router.